INPRO Recycling Filter Washout Booth

The INPRO Recycling Filter Washout Booth delivers the ultimate answer for screen print shops seeking an affordable, safe, and sustainable method to de-ink and degrease screens.

The Pitfalls of the Traditional Screen Washing Method

In many print shops, ink removal after a run still follows a costly, outdated workflow:

• Operators scrape off excess ink and wipe down the stencil using volatile solvents (such as thinners) and disposable wipes.
• The solvents evaporate instantly into the shop air, creating unhealthy fumes, odors, and VOC compliance issues while demanding expensive air circulation systems.
• Expensive shop towels and single-use solvents drive operating overhead significantly higher.
• Towels only remove about 80% of the ink. Once placed in storage, residual ink dries into stubborn ghost images, requiring aggressive, caustic ghost image removers that can damage delicate mesh fibers.

The Smart INPRO Solution

With the INPRO Recycling Filter Washout Booth, screen cleaning becomes clean, fast, and completely safe:

1. Place the screen frame inside the ergonomic stainless-steel booth.
2. Brush the stencil using the dedicated fluid-fed INPRO brush. The safe cleaning agent dissolves plastisol, solvent, or UV inks rapidly.
3. De-ink and degrease in one pass: The mesh is cleaned and chemically degreased simultaneously, keeping it in peak condition.
4. Closed-loop recycling: Cleaning fluid drains through the integrated multi-stage filtration system. Solid ink particulates are filtered out, while active fluid is returned to the circuit for repeated reuse.

100% Pneumatic: Plug & Play with No Electricity Required

A standout benefit of this booth is its purely pneumatic operation. The fluid delivery pump runs exclusively on shop compressed air. There is no electrical wiring or power requirement—simply connect a compressed air line and start cleaning immediately.

Ideal Synergy with the INPRO Combi Compact

The Recycling Washout Booth pairs seamlessly with the INPRO Combi Compact:

• Repeat jobs: Keep the screen for future runs? Clean and degrease the screen in the booth with the stencil intact, then store it on your racks.
• Full reclaiming: Need to reuse the mesh? After quick ink removal in the booth, apply stencil remover and place the screen directly into the Combi Compact for automated high-pressure washout.

• Heavy-duty stainless steel construction with perforated drainage grid and ergonomic splash walls.
• Integrated fluid-fed brush for targeted mechanical scrubbing without chemical aerosolization.
• Pneumatic diaphragm pump: operates entirely on compressed air (zero electrical hazards in wet environments).
• Multi-stage filtration: captures ink solids while maintaining full chemical cleaning efficacy.
• Prevents ghost images: eliminates dried-in ink residues post-printing, slashing the need for harsh de-ghosters.
• Zero towel waste: eliminates thousands of euros spent annually on disposable cleaning wipes and toxic waste disposal.
• Tool-free filter changes: filters can be inspected and replaced in minutes without tools.
• Seamlessly pairs with the INPRO Combi Compact for fully automated water rinse, decoating, and developing.